top of page

Installation of liquid wallpaper

1. Pour clean water at room temperature (without precipitates and contaminants) into the container, the required amount of water is marked on the package.


2. The water in the container is mixed with the fibers in the package and, if desired, silver or gold glitter.


3. Mix the mass by hand thoroughly. DO NOT USE A MIXER FOR MIXING. Leave the mass to set for 12 hours. We recommend that you put time in a plastic bag, you can use a packing bag for it.


4. The mass is installed on the wall in a thin layer with a thickness of about 1-2 mm. The installation is best done with a plastic flat spatula that can be purchased from our online store. The child is held at an angle of 10-15 degrees during installation. If you cannot use the whole premixed mass at once, it can be stored in a closed plastic bag for the next day.


The installed wallpaper is finally dried within 24-48 hours, depending on the room temperature and ventilation. The finished mass can be stored for up to 2 weeks when wet. The remaining mass can be dried by applying it to plastic and used later if necessary for spot repair.


To increase abrasion resistance, the dried liquid wallpaper may cease, it also allows wet cleaning.

NOTE! Once Liquid Fabric Wallpaper is coated with varnish, it can no longer be reused or repaired. So before installing the varnish, make sure that the wallpaper is installed in a place and in a way that suits you (thickness suitable for your taste, and that the entire surface is filled with wallpaper. If there are so-called openings in the wall surface, they cannot be filled after varnishing.)!

The surface to be installed must be dry, clean, free of stains and preferably the same shade as the wallpaper to be installed. Old wallpaper, glue and screws should be removed from the wall before installing liquid wallpaper.


DISCLAIMER The instructions and recommendations we provide are based on our tests and experiences. They are designed to help the user find the most suitable way of working and achieve the best possible result. As the storage, transport and working conditions of the user of the product are beyond our control, we cannot take responsibility for the results he obtains when using the substances and instructions recommended by us.


Instructions for preparing the walls before installing liquid wallpaper(click on the picture)


plasterboard walls


old wall surfaces


Concrete walls


wooden surfaces

bottom of page